← Back to the blog

On-site nitrogen generation: what is usually overlooked when choosing a system, and why it matters

The variables that really determine the performance of an N₂ generation system and the most frequent judgement errors we see in the field.


Gas cylinder with pressure regulator and gauges

Every year, dozens of industrial plants install PSA nitrogen generators without a serious technical analysis of their own process. In most cases the result is predictable: equipment that does not fit, energy consumption above projections and, at best, a system that works but will never run at its optimum point.

This article is not a catalogue selection guide. It is a technical reflection on the variables that really determine the performance of an N₂ generation system in an industrial plant — and on the judgement errors we most often see in the field.

The starting point: understanding what is being asked of the system

Before talking about equipment, we have to talk about process. A nitrogen generator is not a standard plug-and-play product: it is the technical answer to very specific operating conditions. Any specification that does not start from a real analysis of the process has a considerable margin of error.

The three variables that most shape the design are flow, purity and pressure. Not independently, but in how they interact:

  • Going from 99.5 % to 99.98 % purity means around 57 % more energy per Nm³ produced (see what each “nine” costs). If that purity level is not justified by the process, it is simply an avoidable cost.
  • Running a PSA generator below 60–70% of its rated flow significantly reduces the efficiency of the adsorption cycle. Oversizing has a real operating cost, not just an investment cost.
  • Pressure at the point of use rarely matches generation pressure. Ignoring pressure drops in the distribution network leads to specifying equipment whose capacity does not translate into real gas availability in the plant.

To go deeper into the PSA cycle's operating principle, available purity ranges and generator selection criteria, see the complete technical guide:

Technical guide: PSA technology — N₂ / O₂ →

The consumption profile: the most oversimplified variable

If one variable is systematically under-treated in nitrogen generation projects, it is the consumption profile over time. Nitrogen demand in a plant is rarely constant: it varies by shift, by production campaign, by type of process and, in some industries, by season.

A PSA generator is designed to run continuously and steadily. When demand is intermittent or has sharp peaks, the system needs a proper storage strategy. Without it, either the unit cannot respond to the peak — with the resulting process risk — or the generator is oversized to cover that peak, penalising efficiency for the rest of the operating time.

What a poorly analysed consumption profile leads to

  • → Undersized buffer tanks that do not absorb demand peaks.
  • → Generators that start and stop frequently, degrading the adsorbent beds.
  • → Unstable purity at times of high demand, with a direct impact on sensitive processes.
  • → Systems that work correctly in normal conditions but fail precisely when they are pushed hardest.

Compressed-air infrastructure: the constraint that defines the project

A PSA generator does not make nitrogen out of nothing: it separates it from the compressed air supplied by the plant network. The quality and availability of that compressed air is a fundamental design constraint — and one of the aspects most often underestimated at project stage.

Critical parameters of the feed air

Dew point: Compressed air with excessive residual moisture drastically shortens the life of the carbon molecular sieve (CMS). The cost of a suitable dryer is marginal compared with replacing the CMS prematurely.
Oil contamination: Lubricated screw compressors require coalescing and activated-carbon filtration before the PSA generator. Manufacturers require an oil content of 0.01 mg/m³ or less (class 1 to ISO 8573-1); above that value, oil contaminates the CMS irreversibly.
Stable feed pressure: Pressure fluctuations in the air network directly affect the PSA cycle and the purity of the nitrogen produced.
Available vs. demanded flow: If the nitrogen generator will compete with other consumers on the network, you must check that the compressor capacity covers total demand.

PSA technology: when it is the right solution and when it is not

PSA generation is currently the reference technology for on-site nitrogen production at medium-to-high flows with purities of up to 99.999%. But it is not the universal solution it is sometimes presented as. It makes technical and economic sense when consumption is sustained, demand exceeds certain flow thresholds and the site can provide the necessary compressed-air infrastructure.

Need a technical analysis of your installation?

Request a technical consultation →

Learn more about PSA technology:

PSA technical guide →

Other articles

Real cost per Nm³: liquefied gas versus on-site PSA generation → Nitrogen purity: what each “nine” costs → Gas purity and gas quality: two different specifications → Nitrogen generators: membrane or PSA →
WhatsApp