Independent technical consulting

Energy engineering applied to industrial gases

We measure, calculate and design generation systems for nitrogen, oxygen, hydrogen and compressed air. The goal is simple to state and demands rigour to achieve: that you pay only for the gas and energy your process needs, and that supply never fails.

+15years of experience
+85plants optimised
PSAOn-site technology
The first thing we measure

Why spend more if the result is the same?

Asking for more purity than your process needs does not improve the product: it just makes every cubic metre more expensive. Tap and compare. That is what we are here for: to give you the most efficient and most economical solution.

Measure my plant → Open the calculator
PSA generator · reading Running
N₂ purity99.5 %
Residual O₂0.5 %
Air per Nm³ of N₂×2.9
kWh per Nm³ of N₂0.32
Compression energybaseline

Indicative compression values. At your plant we measure them with a calibrated analyser.

About us

The air you breathe is 78 % nitrogen. Separating it at your plant usually costs far less than buying it.

At RAV Energy Consulting we have spent more than fifteen years installing, adjusting and repairing gas generators in wineries, food factories, laser-cutting workshops and laboratories, with a background in physics. We do this work independently: with no catalogue to sell you and with the numbers on the table.

A well-sized PSA generator eliminates cylinders, bulk tankers, deliveries and rentals, and turns gas into an electricity cost you can measure. Badly sized, it uses too much or falls short at the worst moment. The difference lies in the calculations beforehand, and that is where we work.

See how we work →
Detail of a PSA nitrogen generator: pressure regulator, gauge and stainless-steel piping
PSA N₂ generator · pressure and purity control at the point of delivery

What we do for you

From the idea to optimum performance

01

Introduction and study

Understanding your process before talking about equipment: which gas, how much, at what purity and pressure, and with what peaks. Experience with twin-tower and modular PSA, with CMS for N₂ and zeolite for O₂.

02

Technical and economic feasibility

Real cost per Nm³ of your current supply versus on-site generation, including investment, energy and maintenance. Review of contracts and quotations so you can compare on a sound basis.

03

Installation and commissioning

Installation to ISO 22000, European Pharmacopoeia and ATEX standards. Remote PLC connection via Ethernet and historical traceability records.

04

Training

Practical training for your maintenance team: what to watch, what to measure and what to do when purity drops.

05

Technical service and maintenance

Preventive and corrective maintenance of generators and compressors, with an annual plan and costs known in advance.

06

Monitoring with GAS4U

A digital platform to see your installation's purity, flow and kWh per Nm³ continuously, and to detect in time when something starts to degrade.

Discover GAS4U →

Our approach

A gas generator is neither magic nor a black box. Why not produce your own gas?

Bank of high-pressure gas cylinders
Cylinders, bulk tankers, deliveries and rentals: what disappears with on-site generation
N₂ self-supply

On-site nitrogen

Inert atmospheres for industrial processes. Independence from external supply with your own PSA generation. Purity from 95% to 99.999%.

See PSA technology →
On-site O₂ generation

On-site oxygen

Water treatment, ozone, fish farms and the glass industry. A real alternative to cryogenic supply.

Green hydrogen H₂

On-site hydrogen

Generation by electrolysis from renewable energy for combustion, storage and mobility.

See the H₂ solution →

Oxygen for ozone

Twice the ozone, from the same ozone generator

90–95 % PSA oxygen plants to feed ozone generators in wastewater treatment, process water, wineries and the food industry. With purity control and the same control panel as our nitrogen generators.

Diagram of an oxygen plant for ozone: compressor, drying, PSA generator, analyser, tank, ozone generator, water contact and destructor

Industry experience

More than 15 years in industry

Industries where a gas failure stops the line and where every tenth of purity has a cost. Wineries and sparkling-wine cellars are where we have installed the most generators.

Wineries and sparkling wine Food industry Chemicals and pharma Laser cutting Metallurgy Electronics Water treatment · ozone Hydrogen and mobility
See all industries →
Cut-away view of a containerised nitrogen plant: compressors, dryers, PSA generators and tanks
Turnkey plants

Your nitrogen plant, ready to connect

In a 40 ft container or on a compact skid: compressor, drying, filtration, PSA generator and tanks assembled and tested before they reach your site.

Real cases

Wineries, olive oil, beer and laser. With data, without names.

Sparkling-wine cellar · Penedès

Half the nitrogen, in the middle of harvest

The challenge
The PSA generator was delivering half its flow, the cycle pressures were abnormal and the purity reading made no sense. The cellar needed the N₂ for tank inerting, tirage and sterile filtration.
  • ≈ 4 → ≈ 7 bar in the towers
  • 4 purity checks a year (IFS/BRC)
  • 9,000 bottles/h filler ≈ 27 Nm³/h
Large Catalan brewery

A generator at 99.9 %, checked every year

The challenge
PSA N₂ generator in continuous service at a large brewery: 99.9 % purity, ≈ 42 Nm³/h at 7 bar.
  • 99.9 % N₂
  • ≈ 42 Nm³/h · 7 bar
  • Annual certification
Olive oil cooperative · Les Garrigues (Lleida)

The tank was reading 2,000 L too much

The challenge
Olive oil tanks inerted with N₂ (blanketing). With the tank pressurised, the level indicator read between 1,000 and 2,000 L more than after venting.
  • ≈ 31 mbar blanketing
  • 1,000–2,000 L error explained
  • Generator with purity control
Estic agraït a la labor d’enginyeria feta pel Rafel. Ara sí que tota la feina del molí va amb oli.

I am grateful for the engineering work done by Rafel. Now the whole mill really runs as smooth as oil — never better said.

X.V.Olive oil cooperative · Segrià (Lleida)
Des que hem muntat la planta generadora de N₂, en Rafel ha posat sempre els seus coneixements tècnics al nostre servei, entenent perfectament les prioritats, les necessitats i l’eficiència, sempre sense perdre de vista l’economia.

Since we installed the N₂ generation plant, Rafel has always put his technical knowledge at our service, understanding our priorities, needs and efficiency perfectly, without ever losing sight of the economics.

C.P.Laser cutting · Manresa area

See all cases →

Tell us about your case. We'll run the numbers together.

We reply to you directly, usually within 48 working hours. The first conversation is technical and commits you to nothing.

Request a technical consultation →
WhatsApp