Digital platform

GAS4U — Data intelligence for energy management of industrial gases

Hardly any plant knows what each Nm³ of gas really costs. The flowmeters, analysers and electricity meters are already there, but their data are never combined or even looked at. GAS4U brings them together, tells you what is going on and, with AI, what is about to happen.

Request a demo →

Real-time simulation · sample data

This is how your N₂ plant looks in GAS4U

A 99.997 % nitrogen plant for laser cutting. In Synoptic and 3D view you see the generation side: compressor, dryer, filters, activated carbon, PSA generator and N₂ buffer. In Booster you see the high-pressure side, with the booster and two cylinder bundles at 200 bar. Values change every second; press STOP to stop the plant.

Simulation with sample data. Compatible with Modbus, OPC-UA and MQTT · SCADA integration · standalone or integrated operation. Open full screen →

GAS4U screens

Every piece of equipment in the plant, in a single view

Your plant's data already exist: pressures, flow, residual oxygen and production totals appear every second on each unit's screen. But nobody stores them or cross-checks them against the electricity bill. GAS4U brings them together in a single view, stores them and alerts you when something drifts.

GAS4U synoptic screen: compressor, dryer, filters, activated carbon, twin-tower PSA generator and nitrogen buffer with their values
Synoptic · compressed air, PSA and N₂ quality
GAS4U screen with the 3D view of the generation room and status cards for each unit
3D view · status of each unit in the generation room
GAS4U screen of the nitrogen booster and two high-pressure cylinder bundles
Booster and cylinder bundles at 200 bar
Intelligence · AI

What the AI in GAS4U does

The AI in GAS4U is no magic and doesn't replace your judgement. It works on the sensors your plant already has and does three things nobody can do while watching several plants at once: combine, anticipate and alert.

01 · COMBINE

Joins what nobody cross-checks

It gathers flow, N₂ purity, residual O₂, pressures, dew point and electricity consumption —readings that are already there but that nobody compares— and works out what really matters: the true cost of each Nm³, the air factor and the generator's performance. The payback, which shows up on no invoice, finally becomes visible.

02 · ANTICIPATE

Warns before it becomes a failure

It learns each plant's normal behaviour and spots the deviation in time: a filter whose differential pressure starts to climb, a sensor drifting from the reference, a consumption that spikes. It projects the trend and tells you when to act. Predictive maintenance, not reactive.

03 · ALERT

Tells you in plain language

It turns everything into something you can act on: which plant needs attention this week, where money is being lost and which certificate is due soon. No dashboards nobody looks at: the conclusion, when it's needed, and without standing in front of the unit.

N₂ quality is still measured on site, with calibrated equipment. The AI does not replace it: it keeps watch the rest of the time, when nobody is there.

Plant connection

How we connect your equipment to GAS4U

We use the PLC and screen your generator, compressor or dryer already has. We add an industrial router that opens an outbound encrypted tunnel: no port is opened on your network and your IT department does not have to do anything. Choose your PLC brand and connection type to see how it looks.

PLC brand
Internet connection
Already installed in the equipment What we add Industrial Ethernet Outbound encrypted VPN tunnel Data to GAS4U

Swipe the diagram sideways to see all of it →

Tap any element of the diagram Industrial router · what we add

It is the only new device in the cabinet. It mounts on DIN rail, is powered at 24 V from the existing supply and connects with one cable to a free switch port. It opens an outbound encrypted tunnel and reads the PLC data.

What we add to the cabinet

  • Industrial router with VPN and PLC reading, on DIN rail.
  • 4G/5G modem with data SIM and external antenna (or connection through the customer network).
  • Fuse terminal and 24 V wiring from the existing supply.
  • Network cable to a free port on the equipment switch.

Installed in a few hours, with the equipment running or during a short stop.

Compatibility

PLCSoftwareData reading
SiemensTIA Portal · STEP 7S7, OPC UA
OmronSysmac Studio · CX-OneEtherNet/IP, FINS, OPC UA
UnitronicsVisiLogic · UniLogicModbus TCP, PCOM
SchneiderEcoStruxure Machine ExpertModbus TCP
OthersManufacturer'sModbus TCP, OPC UA

If the equipment only has Modbus RTU (RS-485), we add an Ethernet gateway.

Security

  • No open ports: the connection always goes outbound from the equipment.
  • End-to-end encrypted tunnel.
  • User-based access, only to authorised equipment, with a connection log.
  • Machine network separated from the customer's office network.
  • Remote access can be disabled from the plant itself.
RAV Energy Consulting© 2026 RAV Energy Consulting · ravenergyconsulting.com

Pressure gauge on a process gas line
Purity, pressure and flow under continuous control

Real-time monitoring

Integrates data from flowmeters, purity analysers and other sensors installed in the plant. Dashboard with configurable alerts per parameter.

  • Flow, pressure and purity per point of use
  • History with configurable resolution
  • Alerts on deviations of operating parameters

Energy analysis

Calculates the energy cost per unit of gas produced and identifies abnormal consumption patterns with quantified economic impact.

  • Specific energy cost of the gas (kWh/Nm³)
  • PSA generator efficiency under real conditions
  • Detection of leaks or unjustified consumption

Continuous optimisation with AI

Algorithms that learn from system behaviour and recommend operating adjustments to improve efficiency continuously.

  • Predictive consumption models
  • Detection of anomalies and equipment degradation
  • Consumption forecasts for energy planning

Who is GAS4U for?

Plants that already generate their own gas with PSA and want to know whether the equipment performs as on day one.

Plants that buy gas from a supplier and want to check that what they consume matches what they are billed.

Companies with efficiency or emissions targets that need measured, not estimated, data.

Companies that want to integrate gases into their management system or SCADA.

Request a GAS4U demo

We show you the platform and discuss which data from your installation it would make sense to connect.

Request a demo →
WhatsApp