Products · Turnkey plants

Turnkey nitrogen plants

Compressor, drying, filtration, PSA generator and tanks assembled, wired and tested before they reach your site. You connect power and the supply line; we commission it.

40 ftInsulated, air-conditioned container
99.999 %Maximum N₂ purity
TestedIn the workshop, before shipping

Containerised nitrogen plant with the doors open: tank and twin-tower PSA generator inside
Real containerised plant · twin-tower PSA generator and tank
Two formats

Choose how your plant arrives

The technology is the same: PSA generation with carbon molecular sieve (CMS). What changes is where it goes and how it is installed.


Container format

The whole plant in a 40 ft container

The complete plant goes inside an insulated, ventilated and air-conditioned 40 ft shipping container. No building work, no new room: it sits on a level base and is connected. If you move premises, the plant moves with you.

We first design it in 3D from your real consumption, so you can see it before you buy it. Then we assemble and test it in the workshop.

  • Compressors and PSA generators in parallel, depending on the configuration: if one stops, the other keeps producing.
  • Air drying and filtration to ISO 8573-1 before the carbon molecular sieve (CMS).
  • Forced ventilation and air conditioning: the PSA performs the same in August as in January.
  • Lighting, electrical panel and cable trays as standard.
Exterior of the 40 ft container, with access door and ventilation louvres
3D designExterior
Cut-away view of the container with compressors, dryers, filters, air receiver, two PSA generators and N₂ tank
3D designThe whole line
3D detail of the compressors and dryers inside the container
3D designCompressors and drying
3D detail of the two PSA generators and the nitrogen tank
3D designGenerators and tank
Real container interior: refrigerated dryers, air receiver and tanks at the back
Real plantDrying and tanks
Real container interior seen from the compressors, with the air conditioning
Real plantCompressors and cooling

Skid format

The whole plant on a single base

Compressor, dryer, filters, PSA generator and tanks on a single skid. It arrives assembled: put it in place, connect it and it produces.

Dimensions depend on the generator, compressor and tanks you need: we give them to you with the study of your plant.

  • Minimum floor space and a single power connection.
  • Purities of up to 99.999 %.
  • Accessible maintenance and a plant ready to expand.
Compact skid-mounted plant: twin-tower PSA generator, tank and dryer
3D designRear view
Compact skid-mounted plant seen from the compressor
3D designFront view
Technical drawing of the compact skid-mounted plant
DrawingTechnical drawing
Modular plant on three skids: compressor and drying, PSA generator with tanks, and a second dryer
3D designModular skid
Skid-mounted nitrogen plant for laser cutting: compressor, PSA generator, booster and cylinder bundles
3D designLaser cutting · high pressure
Modular PSA generator and buffer tank on a skid, at a wine bottler
Real plantWine bottler

Control and automation

The control panel, assembled and tested in the workshop

A turnkey plant arrives with its control panel assembled: PLC, oxygen sensor, regulators and solenoid valves in the same cabinet.

Every wire is numbered and every terminal identified, with the drawings kept inside the cabinet. Whoever maintains the plant, us or your team, knows what everything is without guessing.

  • Siemens PLC, the industry standard.
  • Built-in oxygen sensor: purity is measured and managed in the plant itself.
  • Valves and assemblies built and tested in the workshop before shipping.
Control panel of a nitrogen plant: Siemens PLC, labelled terminals, oxygen sensor, regulators and solenoid valves
Real plantControl panel
Motorised three-way valve assembly with pressure regulator, built in the workshop
WorkshopMotorised three-way valve
Nitrogen generator control screen: cycle of both columns, purity, pressure and flow in real time
Generator screenCycle, purity, pressure and flow, in real time.
GAS4U overview of a nitrogen plant: compressor, dryer, filters, activated carbon, PSA generator and tanks
GAS4UThe whole plant in a single view, with trends and alarms.

What we do

From your consumption to a running plant

1 · Sizing

From your real consumption: flow, purity, pressure and peaks.

2 · 3D design

You see the plant before it is built, in your building or in the container.

3 · Assembly and testing

The plant leaves the workshop tested.

4 · Commissioning

At your site, with training for your team.

5 · Quality and maintenance

N₂ quality certification and maintenance, if you want it.

Complete nitrogen plant loaded on a truck, mounted on skids
The plant leaves the workshop assembled and tested: it is unloaded, positioned and connected.

Frequently asked questions

What people ask us

Container or skid?

Container if the plant goes outdoors, if you have no compressor room or if you want to be able to move it. Skid if you have indoor space and want to use as little as possible. We propose one based on your consumption and your site.

What do I need to prepare?

A level base, the power supply and the piping to your points of use. We give you the dimensions, power and connection points with the study.

Does it need to be registered?

The air and nitrogen tanks are pressure equipment and are registered under the applicable pressure-equipment regulations. We tell you which documentation is needed with the quotation.

Can it be expanded later?

Yes. A second generator is added in parallel and, if needed, another compressor. That is what we did at a large Penedès winery that went from 15 to 60 Nm³/h without stopping.

Container or skid?

Tell us your consumption and where the plant would go, and we will propose the format that fits best.

WhatsApp