Industries · Wineries and sparkling wine

Nitrogen for wineries and cellars

Your own E 941 nitrogen, produced at the winery for every stage of the wine, from the press to the bottle. No cylinders, no bulk tankers, with purity certified every year.

99–99.9 %Usual purity
E 941Food grade
≈ 3 LN₂ per bottle filled
AnnualPurity certification

Stainless-steel tank hall in a winery
Tank hall · N₂ inerting
Why nitrogen

Oxygen is wine's enemy

After fermentation, oxygen is wine's main enemy: it oxidises aromas, alters colour and encourages the growth of microorganisms. Nitrogen, inert and tasteless, protects the wine at every stage, from harvest to bottle.

Producing it at the winery means having it the moment the process needs it, without depending on cylinders or bulk deliveries, at a fraction of the cost of external supply. And because it barely dissolves in wine, it changes neither its taste nor its carbonation.

We produce it with a PSA generator using carbon molecular sieve (CMS), fed with compressed air treated for food use. See how it works and the full range in PSA nitrogen generators.

Wine bottling line with nitrogen injection
What we tell a winery

“Now, my friend, you’ll have a better wine.”

And that also pays for the generator, even if it never shows up on an invoice. It’s what we call invisible payback: less oxidation and more aroma preserved. The savings on cylinders can be calculated; this one you notice in the glass.


At every stage

Eight uses of nitrogen in the winery

Each operation needs a different purity. The plant is sized for the most demanding one; the others benefit at no extra cost.

Inert pressing

99–99.5 % N₂

Closed pneumatic presses with an N₂ atmosphere for whites and rosés: limits must oxidation and preserves varietal aromas.

Tank inerting

99–99.5 % N₂

Purging empty tanks and protecting the headspace (blanketing) of partly filled ones.

Racking and transfers

99–99.5 % N₂

Purging hoses, pumps and the receiving tank; pressurising tanks to move wine without a pump.

Punch-down and pump-over

99 % N₂

Nitrogen injection to break up and wet the cap of red wines during maceration, without adding oxygen.

Deoxygenation (sparging)

99.5–99.9 % N₂

N₂ bubbling to reduce dissolved oxygen and adjust CO₂ before bottling.

Bottling

99.5–99.9 % N₂

Bottle purging and N₂ injection into the headspace before capping, to extend shelf life.

Cava and sparkling wines

99.5–99.9 % N₂

Inerting of the base wine and tirage tanks, and protected transfers.

Barrels

99–99.5 % N₂

Headspace protection during ageing and topping-up.

Usual reference purities. We define your plant's purity with your winemaker, according to your wines and processes.


How much nitrogen

Inerting a tank is not filling it once

When a tank is purged, the incoming nitrogen mixes with the air inside and leaves carrying part of it. Oxygen does not disappear at once: it falls exponentially with every volume of N₂ that passes through.

After one volume of nitrogen, the tank still holds 8 % O₂. Getting down to 1 % takes almost four volumes. An empty 50 m³ tank uses around 185 Nm³ of N₂ for a full purge; that is why it pays to inert it while filling, displacing the air at the top as the wine comes in at the bottom.

In bottling, a 9,000 bottles/hour filler needs about 27 Nm³/h of N₂: some 3 litres per bottle for purging and headspace injection. This figure was measured at a Penedès sparkling-wine cellar.

0 % 5 % 10 % 15 % 21 % 0 1 2 3 4 5 ≈ 3.7 volumes → 1 % O₂ 1 volume → 8 % O₂ N₂ purge volumes →

O₂ in the headspace of a tank purged with 99.5 % N₂, assuming complete mixing. With a good purge design (inlet at the bottom, outlet at the top) somewhat less is needed.

From consumption to generator. We add up bottling, racking and inerting on the busiest day (at harvest or tirage) and cover the peak with the generator flow plus an N₂ storage receiver. For those 27 Nm³/h of the filler at 99.5 %, an RAV-N 32 would run close to its limit; with margin for the rest of the winery, an RAV-N 52.

Real cases · Penedès and Tarragona

What we have done in wineries

We do not publish our customers' names, but we do publish the application, the area, the flows and what we did.

Half the nitrogen, in the middle of harvest

Sparkling-wine cellar · ≈ 4 → ≈ 7 bar

The generator was delivering half its flow: the dryer had stopped, water got in and saturated the activated carbon. Diagnosis the next day, repair and a proposal for a second generator for the new filler.

From 15 to 60 Nm³/h without stopping the winery

Large winery · 2 generators, 1 network

Expansion with a second PSA generator, shared storage and a single distribution network. The winery quadruples its capacity and gains redundancy.

Purity proven at any audit

Sparkling-wine cellars · IFS / BRC / ISO 22000

Independent certification of nitrogen quality, with a digitally signed certificate ready for the auditor.

From 200-bar cylinders to its own nitrogen

Wine bottler · payback ≈ 8 months

Compact skid-mounted plant next to the filler, with a sterile filter at the point of use and annual maintenance with the certificate included.

Compact PSA nitrogen generator with its tanks next to the filling line of a wine bottler
Wine bottler · Tarragona · compact plant next to the filling line

E 941 and audits

Food-grade nitrogen, with a certificate

Nitrogen in contact with wine is a food additive, E 941, and its specification is set by Regulation (EU) No 231/2012. Food-safety standards (IFS, BRC, ISO 22000) also require you to prove that the gas reaching the wine complies.

That is why we certify the nitrogen quality of your plant with an independent, digitally signed report that cannot be altered and that you can hand straight to the auditor.

Measurements are taken with an oxygen analyser that is calibrated and holds a current calibration certificate, made by a company certified to ISO 9001 and ISO 22000, valid as evidence in IFS Food, BRC and ISO 22000 audits.

Why independent? The generator's analyser is adjusted by whoever installs or services the plant. An auditor values a verification by a technician independent of the equipment, with their own calibrated instrumentation and a certificate nobody can change afterwards.
Control screen of a PSA nitrogen generator showing purity, pressure and flow in real time
Generator screen · N₂ purity, pressure and flow in real time

The generator monitors purity continuously. If residual O₂ exceeds the set point, the reject valve diverts the gas to vent, and off-spec nitrogen never reaches the wine.


FAQ

What winemakers ask us

What nitrogen purity does a winery need?

For most operations (tank inerting, racking, pressing) 99–99.5 % is enough. For bottling, sparkling-wine tirage and the most oxidation-sensitive wines, 99.5–99.9 % is advisable.

Asking for more purity than needed makes nitrogen more expensive: every tenth requires more compressed air. The sensible approach is to size the plant for the most demanding operation and go no further.

Can nitrogen from a generator be used in contact with wine?

Yes. Nitrogen is the food additive E 941, and Regulation (EU) No 231/2012 sets its specification, with a minimum purity of 99 %. A properly fed PSA generator meets it with margin.

What you must do is prove it: the inlet air must be treated for food use and purity must be measured and documented periodically.

Nitrogen, CO₂ or argon?

Nitrogen is the cheapest to produce and barely dissolves in wine, which is why it is the reference gas for inerting, pushing and bottling. CO₂ is denser and forms a protective layer, but it dissolves in wine and changes its carbonation. Argon is even denser and insoluble, but much more expensive.

Many wineries use nitrogen for everything and keep CO₂ or N₂/CO₂ mixtures for specific adjustments, such as keeping the carbonation of a young white wine during sparging.

What happens at harvest, when consumption soars?

That is why we never size for average consumption. We calculate the harvest and bottling peak and cover it by combining the generator flow with an N₂ storage receiver that fills during low-demand hours.

If the winery grows, a second generator is added in parallel, which also provides redundancy. That is what we did at a large Penedès winery that went from 15 to 60 Nm³/h without stopping.

What maintenance does the plant need?

Mainly that of the air line: filters, dryer and drains, which protect the carbon molecular sieve (CMS). An annual generator inspection, O₂ analyser calibration and purity certification complete the plan.

How long does it take to pay back?

It depends on what you pay for nitrogen today (cylinders, bundle rental, bulk and transport) and on your consumption. Tell us your data and we will calculate it.

How much nitrogen does your winery use?

Tell us about your tanks, your bottling line and how you buy nitrogen today. We come back with the plant you need and what you would save.

WhatsApp